article:default
Home > Norms > EN 470-1

Collections


havep_5safety HaVeP® 5safety
havep_4safety HaVeP® 4safety
havep_proban HaVeP® Proban


Certificates


CEetiket

Click here for more details



Test Institutes


HaVeP Protective wear is tested and certified by accredited test organisations such as Centexbel (Belgium) and the Hohenstein Institute (Germany).

All HaVeP protective wear is fully certified

So you can be sure that your clothing complies with all current requirements. Copies of our certificates will be sent to you at your request.

Centexbel notified body for HaVeP protective wear

Hohenstein Institute notified body for HaVeP protective wear


EN 470-1 - Protective clothing for use in welding and allied processes

ISO11611_EN470_1_atwork_470-1_107x80EN 470 EN 470-1 ISO 11611 Protective clothing for use in welding and allied processes EN470 EN470-1 ISO11611

EN 470-1:1995 Protective clothing for use in welding and allied processes – Part 1: General requirements

This standard specifies the requirements for clothing worn during welding operations. This clothing can be worn at normal temperatures for an entire working day (8 hours) and it provides protection against small spatters of molten metal, incidental flame contact and UV radiation. This particular standard does not cover protective clothing worn for special types of welding.

In October 2007, this standard was replaced by ISO 11611 (explained in the following section). EN 470-1 can still be used in clothing for a number of years. However, new certification can only take place in accordance with ISO 1161.

The contents of this standard
Clothing that is EN 470-1 compliant has, similarly to EN 531, a flame pictogram. Under the flame pictogram 'EN 470-1' is given. This standard consists of a series of standards, the most important of which are EN 532 and EN 348.

Different tests
EN 532
This is the test method for limited flame spread. EN 532 is also referred to in EN 531. For an explanation of this test method, see EN 531A.

EN 348
Method for assessing the behaviour of fabrics when exposed to small spatters of molten metal when exposed to small spatters of molten metal. In this test, droplets of molten metal are spattered on a vertically suspended fabric sample. Subsequently, the number of droplets it takes to cause an increase in temperature of 40 0C on the reverse side of the sample is determined. The fabric must be able to withstand at least 15 droplets.

The requirements set in this standard

  • Clothing that complies with this standard must always meet the requirements stipulated in EN 340
  • Exterior pockets must have a flap that is 10mm wider than the actual pocket on both sides. This does not include pockets that are placed behind the side seam and that have an opening of 75mm or less. Vertical pockets under the hips placed at an angle of 10 degrees or less are not required to have a flap
  • Side access openings must always have a flap or hook-and-loop fastener, even if they are placed vertically
  • Side access openings worked into a pocket behind the corner lining are not required to have a flap or hook-and-loop fastener
  • Metal fastenings must be covered on the outside
  • Pleats, etc. must be avoided.
EN 1149 beschermende kleding tegen elektrostatische oplading (explosie en brand) antistatische kleding EN1149EN 1149 beschermende kleding tegen elektrostatische oplading (explosie en brand) antistatische kleding EN1149

EN 1149 - Bescherming tegen elektrostatische oplading (explosie en brand)

Antistatische kleding voorkomt dat door elektrostatische oplading vonken ontstaan, die brand of explosies kunnen veroorzaken.

EN IEC 61482 beschermende kleding tegen thermische gevaren van elektrische vlamboog ENIEC61482EN IEC 61482 bescherming kleding tegen thermische gevaren van elektrische vlamboog ENIEC61482

EN IEC 61482 - Bescherming tegen thermische gevaren van elektrische vlamboog

Beschermende kleding bij het werken onder spanning waarbij blootstelling aan een elektrische vlamboog een risico vormt.

ISO 11611 EN 470 beschermende kleding voor gebruik bij lassen en verwante processen ISO11611 EN470ISO 11611 EN 470 beschermende kleding voor gebruik bij lassen en verwante processen ISO11611 EN470

EN 11611 - Bescherming bij lassen en verwante werkzaamheden

Veiligheidskleding die beschermt tegen spatten van gesmolten metaal, toevallig vlamcontact en UV-straling in 2 klassen.

EN 470 EN 470-1 ISO 11611 beschermende kleding voor gebruik bij lassen en verwante processen EN470 EN470-1 ISO11611EN 470 EN 470-1 ISO 11611 beschermende kleding voor gebruik bij lassen en verwante processen EN470 EN470-1 ISO11611

EN 470-1 - Bescherming bij lassen en verwante werkzaamheden

Vanaf oktober 2007 is de norm EN 470-1 vervangen door de nieuwe, uitgebreidere norm ISO 11611.

ISO 11612 EN 531 beschermende kleding voor gebruik bij hitte en vlammen ISO11612 EN531ISO 11612 EN 531 beschermende kleding voor gebruik bij hitte en vlammen ISO11612 EN531

EN 11612 - Bescherming tegen hitte en vlammen

Beschermkleding tegen vlamcontact, convectie warmte (geleiding), stralingshitte, gesmolten metaalspatten, contacthitte en water.

EN 531 ISO 11612 beschermende kleding voor gebruik bij hitte en vlammen EN531 ISO11612EN 531 ISO 11612 beschermende kleding voor gebruik bij hitte en vlammen EN531 ISO11612

EN 531 - Bescherming tegen hitte en vlammen

Beschermende kleding tegen contact met vlammen, convectiewarmte (geleiding), stralingshitte en spatten van gesmolten metaal.

EN-13034-6 beschermende kleding tegen vloeibare chemicaliën EN13034 EN13034-6EN-13034-6 beschermende kleding tegen vloeibare chemicaliën EN13034 EN13034-6

EN 13034-6 - Bescherming tegen vloeibare chemicaliën

Vloeistofafstotende kleding die beschermt tegen kleine spatten en een lichte nevel van chemische vloeistoffen.

EN 471 ISO 20471 beschermdne kleding voor hoge zichtbaarheid hoge zichtbaarheidskleding EN471 EN20471EN 471 ISO 20471 beschermdne kleding voor hoge zichtbaarheid hoge zichtbaarheidskleding EN471 EN20471

EN 471 - Bescherming door hoge zichtbaarheid bij dag, schemer en nacht

Hoge zichtbaarheidskleding die visueel opvalt bij gevaarljke situaties in lichte en donkere werkomstandigheden.


ISO 20471 - Bescherming door hoge zichtbaarheid bij dag, schemer en nacht

Nieuwe norm voor hoge zichtbaarheidskleding die momenteel in voorbereiding is als opvolger voor de nu nog geldende norm EN 471.

EN 342 bescherming tegen kou koude vrieskou diepvrieskleding EN342EN 342 bescherming tegen kou koude vrieskou diepvrieskleding EN342

EN 342 - Bescherming tegen koude en lage temperaturen

Ademende werkkleding tegen een koude omgeving met vocht, nattigheid, wind en/of een luchttemperatuur lager dan -5° Celsius.

EN-343-x-y 80x80EN 343 bescherming tegen slecht weer regen wind ademende kleding EN343

EN 343 - Bescherming tegen regen en slecht weer

Ademende beschermkleding tegen neerslag (regen, sneeuw), mist, vochtigheid, wind en andere gure (weers)omstandigheden.

 

Latest news



Hotline - easy to contact

Name:
Tel.:
Email:
Subject:
Message:
Anti-spam vraag: welk jaartal is het nu

Certification check

Is the CE mark in your product genuine?

We guarantee that our CE-marked products are 100% legally valid and genuine. You can now check this here.:

keyword

blank
blank
blank